Evaporative
Cooling and More! Evaporative Cooling Pads, Coolers, PreCoolers and
More...
ATEC/Indirex HaveACoolDay.com
Phone 303.816.7075 Fax 303.838.9651
|
ATEC/Indirex HaveACoolDay.com Phone 303.816.7075 Fax 303.838.9651
|
|
Quick Shipments: Most products in Stock! Charge by Phone or Fax! with Visa or MasterCard Call 303.816.7075 Fax 303.838.9651
|
[GLASdek Literature] [GLASdek MSDS Sheets] [CELdek Literature] [CELdek MSDS Sheets]
In Stock for Quick Shipment
Featuring: Munters GLASdek® Evaporative Cooling Media
Fire Rated Evaporative Cooling and Humidification Media Key Benefits
Made from a flame retardant material fortified with special rigidifying agents "THE" media choice where strict adherence to fire codes is required Shallow, unequal angle flute design allows high velocity air flow with minimal resistance and water droplet carryover Resists clogging caused by dust, sand or other debris Self-cleaning design directs more water towards the air entering face of the pad to flush away dirt and debris Unique cross fluted design with unequal angle pads induce highly turbulent air and water mixing for optimal heat and moisture transfer. TuF edg Protective Edge Treatment option available
Munters CELdek® Evaporative Cooling Media Key Benefits
Shallow, unequal angle flute design allows high velocity air flow with minimal resistance and water droplet carryover Resists clogging caused by dust, sand or other debris Self-cleaning design directs more water towards the air entering face of the pad to flush away dirt and debris Unique cross fluted design with unequal angle pads induce highly turbulent air and water mixing for optimal heat and moisture transfer. MiT edg Protective Edge Treatment option available
Ordering Information: ATEC/Indirex prices all media on either the square foot or cubic foot basis, therefore it is important to understand the standard dimensional information: Evaporative Cooling Media 45/15 flute angles with ~1/4" flute height
Distribution Pad 45/45 flute angles with TUFedg on two sides
All other Depths, Widths, and Heights are cut to order and customer pays drop charge up to next standard dimension.
Useful formulas: Cubic Feet of Kuul Media = Depth (Inches) X Width (Inches) X Height (Inches)
Square Feet of Distribution Pad = Width (Inches) X Length (Inches)
Example: Evaporative Cooler Unit Dimensions: Depth = 18" (in direction of airflow) a standard dimension Width = 126" standard width = 12" or 24" next standard increment of width = 132" Height = 68" including 2" dist. pad standard height = 72" cut media to 66"H Media cubic feet = (18" X 132" X 72") / 1728 = 99.0 cubic feet Distribution Pad square feet = (18" X 132") / 144 = 16.5 square feet
We would be glad to send you more information or a sample to test. * GLASdek is a registered trademark of Munters Corp - GLASdek descriptions come from Munters literature MB-GDB-0412 |
|
Send mail to
Info@HaveACoolDay.com with questions or comments about this web site.
|
